BS-20 Wet cable wire separator machine
Technical data :
Model : BS-20
Separation rate : 99.8%
Processing diameter : less than 25mm
Size : 320*290*5750px
Weight : 2000kg
Power : 17.8kw
Valtage : 110V/220V/380V/460V
Capacity : 150-300kg/h
1 : Hopper 2 : Crusher 3 : Vibration Table
4 : Water Pump 5 : Control Box
Specification
1 : All of oil hole must be filled with mechanical butter before operation (once a week)
2 : The water tank must be filled with water
3 : Press the power buttons in the following sequence: water pump/segregating unit/grinder.
Feed water level regulation
1 : Adjust the water level according to the quantity of PVC/rubber particles and copper particles on
the separator plate.
2 : If there are more PVC/rubber particles in copper particles, the water level could be appropriately adjusted higher.
3 : If the PVC/rubber particles don’t go up with copper particles together, the water level could be
appropriately adjusted lower.
The way to replace the screen
1 : Replacing the screen is aimed to increase working efficiency, separating the PVC/rubber particles and copper particles completely.
2 : When replacing the screen, firstly, open the right cover of the grinder; then, loosen the screw of screen to remove it; finally, put the ideal screen into it.
3 : Replacing the screen according to the wire diameter (communication wire: Φ2-2.5mm;
electric wire: Φ2-2.5mm;other wire: Φ3-5mm
4 : Adjustment of the screen: The ideal distance between the screen and the rotary cutter is about 1mm.
The way to sharpen knives
1 : Rotary cutter: Sharpen it by grinder and hold the blade at the ideal 15 degrees. ( No need to
remove the blade).
2 : Stationary knife: Sharp it by grinder or grinding machine after removing the stationary knife.
3 : Knife adjustment: The ideal distance between rotary cutter and stationary knife is about 0.2mm.
- Buy BS-20 Wet cable wire separator machine for sale,price,BS-20 Wet cable wire separator machine exporter/importer,suppliers,factory,manufacturers in China.
- unité de puissance électrique
- - déchets de fils de cuivre bs-kof machine automatique
- les fils électriques machines automatiques (bs-013) utilisé
- bs-600tm granite cutter machine machine à couper le béton
- fil machine bs-40 séparateur humide de câble
- fil machine bs-005 épluchage automatique de recyclage
- la machine mr-c recyclage des automobiles
- déchets de fils de cuivre efficace machine automatique de bs-015m distinct
- cc-50b cable cutter