1 . Introduce :

BS-011Cable Stripping Machine (Special for Cables)

​With wide application range and lone service life, this machine is specialized at stripping all types of cables including high-voltage cables and fiber optic wires. Distance between blades can be adjusted for stripping cables of different size. It has both forward and reverse turning functions which can solve the problem of cable jamming during operation. (Cable Diameter Range: 10～75mm) 

2 . Technical data :

Voltage/Power: 220V/3KW 

Dimensions: L640×W700×H1510MM 

Weight: 150KG

Output: 800-2000KG/DAY

Check the rolling direction is right or wrong,, if not, adjust the button or connect the motor again. Make the direction same as picture above.

Adjust the distance between 2 blades and 2 rolls.(adjust the blades to the position which can strip the outer plastic, adjust the rolls adhere to the cable which can smooth through the machine, same as the above picture.)

Adjusting diagram(the distance of  two rolls can be adjust by the two screw rod, refer to the picture;  loose the screws and then adjust the distance between 2 blades)

Reduction gear: oiling the reduction gear in time.( the speed of neutral position is zero,the higher gear the higher speed, change the gear after stop the machine, u need to put neutral position first)

Note :

Check the rolling direction first, don’t put your hands into the machine in order not to hurt.don’t stretch your hands into the protection cover and all the transmission parts.if u find something wrong with the machine, pls turn off the machine first and then check.keep children away from the machine.